A professional joint tape putty and installation device. The joint tape installation device simultaneously installs joint tape and putty at plasterboard joints. Can be used on walls, ceilings and inside corners for joint tape installation and putty.

Installing joint tape is a time-consuming and messy job. With this professional-grade device, you can install the tape and putty on the wall quickly and easily. The 1.8L putty container holds plenty of putty and also has a quick-fill feature. The device applies the joint tape, putty and presses the whole thing onto the drywall joint in one go. The best and fastest way to seal large quantities of drywall joints.

The device can also be modified for left-handed use. Illustrated instruction manual included.

Automatic seam tape feeding is done by placing the seam tape in the holder on the back of the machine. The seam tape is pulled through the machine's putty box and out the front edge of the machine.

Automatic seam tape caulking occurs as the seam tape passes through the caulking container. This ensures that the tape contains just the right amount of caulking for installation.

Installing the seam tape in inside corners is also possible using the device's corner guide. The guide presses the tape from the center at a 90-degree angle, allowing the puttyed tape to sit neatly in place.

Quick-fill feature at the bottom of the device, allowing the device's putty tank to be filled quickly.

Applications: Installation of plaster and gyproc joint tapes.
Instructions for use:
Normal use:

Open the locking latches of the device's putty container (3 pcs.)
Place the seam tape in the holder and pull it through the putty container from below, following the top edge of the putty container and out of the feed opening on the front of the device.
Fill the joints with filler by placing the filler in a container below the joint tape.
Release the putty regulation latch on the front of the device, allowing the front edge of the device to move freely.
Moving the leading edge up and down determines the amount of screed in the seam tape.
Lock the screed adjustment latch in the desired position
Pull the seam tape out of the device until it is completely covered by the screed.
Adjust the hand strap tension to suit
Press the seam tape onto the joint of the boards using the device
Press the seam tape firmly into place with a leveling trowel.

Use in corners:

Set the machine up for normal use.
Lower the guide roller at the front edge of the device.
You can now press the seam tape into the inside corners as well.