Kapro Optivision 8 M Tape Measure, 25 mm tape, double-sided

The Kapro Optivision Tape Measure (510) is designed for precise length measurements in installation, construction, and furniture work. The Optivision scale uses high-contrast coloring that makes millimeter and centimeter markings clearly visible even in varying lighting conditions. The double-sided printing allows reading from both top and bottom, speeding up measurements in tight spaces and edge measurements.

The body is shaped to fit comfortably and has grip surfaces for a secure hold. The lock button controls the tape length: the measurement stays in place for marking or fitting, and releasing brings the tape back into the case smoothly. The end hook movement compensates for inside and outside measurements, automatically accounting for the hook's thickness in the result.

The tape blade is made of steel with clear millimeter and centimeter scales. Double-sided printing supports measurements where the viewing angle varies or the surface is above or below eye level. It's easy to clip to your belt with the built-in clip, and the wrist strap makes handling easier on ladders and scaffolds.

The core of the Optivision solution is readability: the contrast between dark and light colors highlights the main divisions and helps you quickly spot the measurement point. This reduces the need to shift your gaze from the tape edge to the mark and supports consistent results even when conditions change.

Uses include panel and frame measurements, furniture and trim sizing, pipe and duct runs, electrical and fixture placements, and general length measurements indoors and out. The double-sided scale is especially helpful for edge measurements when the tape runs along the shadowed side of a structure or visibility is limited.

Intended use:

Construction and installation measurements – Frame sizing, opening dimensions, level and trim cuts, plus equipment and furniture alignments. Double-sided printing saves time since you can read from either side without twisting the tape. The lock makes it easy to mark exact spots, and the end hook handles inside and outside measurements without manual adjustments.
Electrical and HVAC jobs – Outlet and conduit spacing, pipe and duct routing, and component distances. The Optivision scale's contrast improves number visibility in dim areas, and the belt clip plus wrist strap make it easy to carry between job sites.
Woodworking and furniture tasks – In the workshop or on-site, for cutting lengths, fitting measurements, and repeats. The double-sided scale makes reading easy even if the piece is over the bench or you're measuring from the back edge. The lock and controlled rewind mean you don't have to keep the tape tensioned all the time.
Interior and finishing work – Curtain rods, towel rails, railings, and picture ledges. Edge measurements and height differences are simple to read without flipping the tape, and the wrist strap helps when working from ladders.

Package contents:

Kapro Optivision Tape Measure (510)
Wrist strap
Belt clip integrated into the body

Features:

Optivision scale: High-contrast printing highlights main divisions – easier reading in varying light.
Double-sided printing: Scale on both sides of the tape – readable whether measuring up or down.
Lock mechanism: Holds the tape at the chosen length – simplifies marking and repeat measurements.
End hook movement: Compensates for hook thickness – inside and outside measurements without manual correction.
Steel tape blade: Millimeter and centimeter divisions – perfect for precise length measurements.
Ergonomic body and grip surfaces: Secure hold – easy one-handed use on the job site.
Belt clip and wrist strap: Quick carrying and secure grip when working on scaffolds.
Clear numbers and main divisions: Quick visualization – reduces reading errors in repeated measurements.

Kapro Optivision Tape Measure instructions:

Preparation: Make sure the tape edge is clean and there are no bits of debris on the surface that could affect the reading. Check the end hook movement and ensure it moves smoothly.
Starting a measurement: Hook the end to the edge of the piece or surface. Pull the tape to the desired length and press the lock down. Hold the case steady with a firm grip.
Reading: Read the measurement directly from the Optivision scale at the point. Use the double-sided printing when the viewing angle is tight or you're measuring on the shadowed side of a structure.
Marking: Keep the lock engaged and mark the spot. Ensure the tape stays straight against the piece.
Rewinding the tape: Release the lock gently. Let the tape retract by lightly holding your finger near the edge for controlled return.
Repeatability: Repeat the measurement as needed and keep the end hook attachment consistent each time.
Maintenance: Clean the tape and case with a soft cloth. Avoid solvents or abrasives. Store in a dry place and prevent long-term bending that could warp the tape.

Warnings:

Watch out for fingers getting pinched between the tape and body when it retracts.
Cut risk: The tape edge can be sharp – handle with care.
Don't let the tape snap back into the case uncontrolled.
Don't use near live wires without proper precautions.
Keep out of reach of children.

Frequently Asked Questions, FAQ:
What's the advantage of the Optivision scale?
The contrast printing and clear main divisions speed up reading and reduce misinterpretations.

Why is double-sided printing useful?
The measurement is readable from both sides, making it easier in tight spots and edge measurements.

Can the end hook movement affect the measurement?
The hook movement is designed to compensate for its thickness, so inside and outside measurements match the true length.

How do you maintain the tape measure?
Clean the tape regularly and avoid solvents. Store dry and protect from impacts.

Does it come with a belt clip and wrist strap?
Yes, it's equipped with a belt clip and wrist strap for comfort.

Recycling instructions:

Packaging: Sort plastic parts into plastic recycling.
Product: Dispose of as mixed waste.