Gorilla Wood Glue 118 ml

Gorilla Wood Glue

Reliable and durable waterproof wood glue.

Gorilla Wood Glue is designed to give a strong and long-lasting bond on all kinds of wood surfaces. Its special feature is the tough and waterproof formula, making it perfect for both indoor and outdoor use. Gorilla Wood Glue combines the easy-to-use water-based PVA glue with Gorilla's famous gripping power, ensuring reliability in all your wood projects.

Features:

Clog-proof applicators: Practical applicators prevent the glue from clogging, making it easier to spread.
Suitable for indoor and outdoor use: Gorilla Wood Glue is built to handle different weather conditions, so you can use it inside or out.
Waterproof (D3): The glue resists water and moisture, which is super important for outdoor stuff.
Clamp time 20–30 minutes: This gives you enough time to get your work just right before the glue sets.

How to use:

Prep: Before applying the glue, remove the clear applicator tip and clean off any glue buildup. If the glue's gotten thick or separated, shake the bottle well until it's back to normal.
Application: For the best results, prep the wood surfaces carefully before spreading the glue. The wood should be smooth and free of tool marks, tears, or grooves. For hard-to-glue woods, apply glue to both surfaces and rub them together evenly. Spread enough glue so that a little squeezes out when you clamp.
Clamping: Pick the right clamping technique and type based on the joint, wood type, moisture, room temp, timing, and surface quality. Usually, clamp for 20–30 minutes at room temperature, with full cure in 24 hours. Keep in mind that temperature affects clamp time, and it should be over 13 °C.

Cleanup and Storage:
Cleanup when glue is wet:

Wipe excess glue right away with a clean, damp cloth.
If needed, use sandpaper or sharp tools to remove dried glue from surfaces.
The quicker you clean it up, the easier it is.

Cleanup when glue is dry:

If the glue has dried on surfaces, try sanding it off gently or using a suitable glue remover.
Avoid scratching the wood while removing the glue.

Cleaning glue off skin:

If glue gets on your skin, wash it off right away with warm soapy water.
Use soap and warm water for hand washing.
If necessary, you can also use a solvent for skin cleanup.

Bottle tip cleanup:

Close the glue bottle tightly after use and wipe excess glue from the tip with a clean, damp cloth.
If the tip clogs with dried glue, remove the cap and push the clog back with a toothpick, then rinse the cap with warm water.
Keep the cap and tip clean so you can use the glue later without issues.

Storage:

Close the glue bottle carefully after use to keep air out.
Store at room temperature, avoiding freezing temps.
If the glue thickens or separates over time, shake the bottle well until it's back to normal.

Gorilla Wood Glue gives you reliable and tough glue for all kinds of wood projects, whether you're making furniture, doing woodworking, or building stuff outside. Trust Gorilla Wood Glue for top-quality wood bonds.
Attachments:

SAFETY DATA SHEET