Insulation cutter for precise cutting of insulation of different thicknesses. Cutting table for stone and mineral wool. The device is attached to the wall with screws from the upper edge suspension points. The cutter has a measuring scale for precise sizing. The cutter is delivered in parts in a box. Suitable for wools 5-20cm thick. Cutting insulation material like stone wool or insulation wool accurately to size can be tricky. We offer a solution, namely the Robota insulation wool cutting table, which is perfect for cutting insulation. With the cutting table, you can cut the wool either straight or at the desired angle precisely. How to use: Set the cutting table upright, e.g., on the wall about a meter high from the ground, so it's comfy to use. Then place the insulation material to be cut on the cutting table so that the spot to cut is in the groove between the two aluminum guides. Next, take a knife meant for cutting insulation wool, slide it between the guides. Press the guide firmly against the insulation wool with one hand, and with the other, start sawing the wool while pushing the knife downward. This way, the wool cuts precisely and straight to the desired width. If you want to change the cutting angle, first set the left horizontal part to the desired angle. Then place the wool in the spot where it needs to be cut and cut it. Super handy to use.
