Clamping pliers for tile leveling system with wedge model

Tightening pliers for the tile leveling system's wedges for the wedgeable tile leveling system. With the tightening pliers, you tighten the tension wedges firmly into the leveling wedges, so all edges of the tiles are perfectly level.

The system helps you level the tiles to the same height, so there are no height differences between them. A perfect tool for both DIY enthusiasts and pros who want to get perfect results quickly.

When installing floor tiles, it's super important that they're all at the same level. Getting tiles level can be tricky even for pros and take a ton of time. Uneven floor tiles feel awful to walk on, and the height differences at the edges can stub your toes painfully and look bad in indirect lighting.

The leveling wedges are single-use and you snap them off under the tiles once the mortar dries.

Tip: You can also use tile spacers to set the grout joint size if the leveling system makes the joints too thin.
Usage Instructions

Spread the right amount of adhesive mortar on a flat surface using the appropriate sized trowel.
Place the Leveling Wedge between two floor tiles so the foot part goes under the tiles and the upright part between them. The upright part automatically creates a joint the width of the wedge.
Push the Tension Wedge through the leveling wedge so it rests on top of both tiles.
Tighten the tension wedge against the leveling wedge using the tightening pliers, so the tile edges come level.
Repeat the process across the whole floor, so the entire floor is level with no uneven spots between tiles.
Once the mortar is dry, remove the tension pieces from the wedges and tap the wedges lightly.
When tapping the wedges, they snap neatly along the break lines on the base, then you can sweep the broken pieces off the floor.
The leveling wedges stay hidden under the grout. Grout works best with a good quality grout float.
Once the grout is dry, clean any loose grout off the tiles, like with a tile cleaning kit.

Package Contents

250 leveling wedges