{"product_id":"yato-pyoeroeharja-m6-75-mm-rst","title":"Yato Round brush M6 75 mm stainless steel","description":"\u003cp\u003eYato Round Brush M6 75 mm RST is a round brush made of stainless steel wire for drilling machines for mechanical cleaning and pre-treatment of metal surfaces. The crimped wire structure produces a moderate and even cut, which is suitable for large surfaces without excessive material removal. The compact Ø75 mm size allows for precise control in edges, corners and tight spaces.\u003cbr\u003e\n Stainless steel wire (INOX) is resistant to moisture and outdoor conditions and reduces the risk of iron contamination on stainless steel surfaces. This is useful in maintenance applications where the surface needs to be prepared for coating, bonding or painting while maintaining the geometry of the base material.\u003cbr\u003e \nThe M6 ​​mounting allows for direct and central mounting in a drill chuck or suitable adapter. The adjustable speed of the drill makes work on thin sheets and heat-sensitive surfaces manageable. With the right working parameters, brushing produces a uniform microstructure that improves the adhesion of primer and coatings.\u003cbr\u003e\n Typical applications include removing rust and flaking paint residue from railings, stair parts, sheet metal structures and machine parts, cleaning oxide layers in welding areas and general pre-cleaning before chemical or mechanical finishing steps.\u003c\/p\u003e\n\n\n\n\n\n\u003cp\u003e Intended use:\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Removing rust and paint residue from metal surfaces: The corrugated wire opens up corrosion and weak coating layers, leaving a uniform roughness. The small diameter allows precise control in profiles and corners, which makes it easier to work on railings, stair parts and machine components. The work progresses in a controlled manner with light to moderate pressure and moderate speed.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n \u003cp\u003eCleaning oxides and small spatters from weld areas: The brush removes oxides and spatters from heat zones before grinding, passivation or painting. The flexibility of the corrugated wire reduces the creation of deep grooves compared to more aggressive braided wire brushes, which speeds up subsequent finishing steps.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Surface roughening before coating\/gluing: Mechanical roughening creates a uniform microstructure without heavy material removal. This improves the mechanical adhesion of primers, coatings and adhesives, especially on smooth sheet surfaces and thin profiles.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Maintenance in humid and outdoor conditions: The corrosion resistance of INOX wire allows it to be used on outdoor steel structures and in humid areas. The particles released from the brush do not contribute to the formation of new rust spots in the same way as carbon steel wire.\u003c\/p\u003e\n\n\n\n\n\n\n\u003cp\u003e Features:\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Diameter: 75 mm – Precise working in tight spaces and along edges.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Mounting: M6 – Direct and centered mounting to the drill chuck\/adapter.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n \u003cp\u003eBristle material: Stainless steel wire (INOX), crimped wire – Moderate aggressiveness and corrosion resistance.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Structure: Round brush – Suitable for flat surfaces and brushing along edges.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Applications: Rust, paint, oxide, light spatter – Pre-cleaning and roughening before coating.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Operation: Adjustable speed – Avoid overheating; use light to moderate pressure to ensure a smooth finish.\u003c\/p\u003e\n\n\n\n\n\n\n\u003cp\u003e Yato Round Brush – User Manual:\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Installation: Disconnect the drill from the battery\/mains. Attach the brush to the M6 ​​mount or chuck directly and centrally; tighten according to the manufacturer's instructions.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Test drive: Run briefly in neutral; stop if abnormal vibration or wobble occurs.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Working: Work at a gentle angle, make even strokes and let the wave wire do the work. Avoid point pressure and excessive heat.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Pause and clean: Stop regularly, remove loose material and check for wear.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n \u003cp\u003eMaintenance: Clean from dust\/chips, dry and store in a dry place. Do not forcefully straighten twisted wires.\u003c\/p\u003e\n\n\n\n\n\n\n\u003cp\u003e Warnings:\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Always wear safety glasses\/visors, protective gloves, a respirator suitable for the dust level and, if necessary, hearing protection.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Do not exceed the speed allowed by the brush\/machine; avoid imbalance.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Do not use a damaged or crooked brush.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Keep flammable materials away from the work area; sparks may be generated from the workpiece.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Not for use in potentially explosive atmospheres. Keep out of reach of children.\u003c\/p\u003e\n\n\n\n\n\n\n\u003cp\u003e Frequently Asked Questions, FAQ:\u003cbr\u003e\n Why corrugated wire and not braided wire? Corrugated wire is less aggressive and leaves a more uniform roughness on large surfaces; braided wire is more effective on thick rust and slag.\u003cbr\u003e\n Can the brush be used on stainless steel? Yes. INOX wire reduces the risk of iron contamination. Clean the surface after use.\u003cbr\u003e \nIs the brush suitable for aluminum? For light deoxidation and roughening, yes. Avoid excessive pressure and heat to avoid scratching the surface.\u003cbr\u003e\n When should you replace the brush? When the wire is unevenly worn, bundles are missing, or vibration increases – replace it with a new one.\u003c\/p\u003e\n\n\n\n\n\n\u003cp\u003e Recycling instructions:\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Packaging: Cardboard\/paper - recycling; any plastic films - plastic collection.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003e Product: Metal parts (center, wire) - metal collection; other parts according to local regulations.\u003c\/p\u003e","brand":"Toolia Työkalumaailma","offers":[{"title":"Default Title","offer_id":56164156080453,"sku":"46-YT-47568","price":3.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/9278\/4709\/files\/yato-pyoeroeharja-m6-75-mm-rst-hopeinen-johdotettu-harja-metallinen-998.webp?v=1775605692","url":"https:\/\/toolia.fi\/en\/products\/which-corn-broom-m6-75-mm-rst","provider":"Toolia - House Of Tools","version":"1.0","type":"link"}