Edma battery-powered suction cup PRO is an electric vacuum lifter designed specifically for for rough, structured and smooth surfaces . The soft The foam sealing ring adapts to uneven surfaces , ensuring a secure grip and respecting the surface of the material. Digital display enables precise monitoring of vacuum during work, improving safety and repeatability.

Device automatic start/stop keeps the vacuum level stable: the pump stops when the required pressure is reached, and automatic pressure control restarts the pump if the vacuum drops below the set threshold. The display indicates the target level, and in practical lifting situations The maximum capacity is 160 kg . Pressure relief is done in a controlled manner by double-pressing a separate button.

Ergonomic handle and 160 × 260 mm suction base provide stability for large-sized boards and tiles. Internal 12V/1500mAh Li-ion battery (15Wh) give up 22 hours operating autonomy. Charging takes place With USB-C cable about in 3 hours , making the device suitable for long-term installations on the construction site. CE marking reports compliance. Net weight 1.05 kg facilitates handling and transportation in the included in a carrying case .

Supporting the user experience ON/OFF button , separate pressure relief button mixed Replaceable dust protection elements that keep the pump system cleaner in dusty conditions. Adaptive sealing, automatic vacuum control and a clear display combine to reduce the risk of errors, speed up work steps and support repeatable, high-quality installation work.

Intended use:

• Processing and installation of tiles and stone slabs indoors and outdoors. Moving and aligning large floor and wall tiles is made easier because the device automatically maintains negative pressure. The foam sealant also adheres to sandblasted and structured surfaces, allowing heavy panels to be installed in a controlled manner without slipping or surface damage.

• Lifting and moving glass, composites and metal sheets. The digital display provides constant visibility of the adhesion. The lightweight frame and 160 × 260 mm suction base distribute the load evenly, which is an advantage for thin panels and surfaces where point loads should be avoided.

• Installation of carpentry and interior design elements (e.g. doors, panels, countertops). Automatic vacuum maintenance frees the operator to focus on alignment and fastening. Double-pressing the pressure release button allows for controlled release without sudden “jerks”, reducing the risk of tears and splits.

• Facade and stone work on uneven surfaces. The foam seal compensates for surface irregularities, allowing the handling of block-faced stones or structural panels. This is especially helpful in installations where a traditional rubber cup does not adhere well enough.

• Maintenance and renovation. USB-C charging and long autonomy make the device suitable for mobile work. The carrying case protects the device during transport and enables quick transitions from one workstation to another, even in dusty conditions.

Package contents:

• Battery-powered suction cup lifter (Ref. 269755)

• USB-C charging cable

• 2 replacement dust covers (dustproof cotton)

• Carrying case

Features:

• Maximum capacity: 160 kg – enables safe handling of heavy plates with one tool.

• Suction base: 160 × 260 mm – wide grip surface distributes the load and improves grip on large discs.

• Sealant: Soft foam seal ring – conforms to rough/textured surfaces and improves grip.

• Digital display: Real-time monitoring of vacuum pressure – increases operational safety and repeatability.

• Automatic start/stop: The pump stops at the target level and restarts when the vacuum drops – reducing the load on the user.

• Automatic pressure control: The pump maintains a vacuum between ~160–200 kg depending on the display value – ensuring continuity of the attachment.

• Pressure relief: Double press – controlled release without sudden loss of grip.

• Handle: Ergonomic, 120 mm length – improves grip and maneuverability.

• Battery: 12 V, 1,500 mAh Li-ion, 15 Wh – long operating time on a single charge (autonomy up to 22 h).

• Charge: USB-C, charging time approx. 3 hours – compatible with modern power supplies.

• Dimensions and weight: Net weight 1.05 kg – easy to transport and handle.

• Approvals: CE certified – compliant with EU market requirements.

Edma Battery-powered suction cup PRO – user manual:

1. Before use. Check the condition of the seal, clean the suction base and the surface of the workpiece from dust and loose material. Make sure the battery has sufficient charge. Attach the device to the workpiece by pressing the suction base evenly against the surface.

2. Starting and creating vacuum. Press the ON/OFF button. The pump will start and stop automatically when the required vacuum is reached (the display shows the target level). Do not lift the piece until the display confirms adhesion.

3. During lifting and moving. Follow the digital display. If the vacuum drops, the automatic adjustment will restart the pump and restore the level. Hold the handle with both hands when handling heavy loads and avoid jerking movements.

4. Detachment. Support the piece securely and release the grip double-click Only lift the device off when the vacuum has been released.

5. Charging and maintenance. Charge the device with the included With USB-C cable . Normal charging time is approx. 3 h . Clean the suction base and sealing ring after use; replace dust protection elements Store the device in a dry carrying case and avoid prolonged compression, which could deform the seal.

Warnings:

• Do not exceed 160 kg load. Take into account the surface of the material and safe working positions.

• Do not use on oily, loose or crumbling surfaces where vacuum will not hold. Always check the grip on the display before lifting.

• Do not leave a load hanging unattended. Keep hands and feet away from pinch points.

• Do not use the device in explosive environments or expose the battery to heat, shock, or water.

• Turn off the power and unplug the charging cable before servicing. Use only replacement parts provided or approved by the manufacturer.

Frequently Asked Questions, FAQ:

What is the lifting capacity of the device?
The maximum capacity is 160 kg when the surface is suitable and the grip is sufficient. Always follow the manufacturer's instructions and assess the conditions before lifting.

Does the device work on structured and rough surfaces?
Yes. Soft foam sealing ring adapts to unevenness, allowing adhesion even to rough and structured surfaces.

What is the difference between an electric suction cup and a traditional manual suction cup?
Electric model maintains negative pressure as a matter of routine and indicates the level with a digital display , which reduces the need for a hand pump and improves repeatability in long installations.

How long does the battery last and how do I charge it?
The operating time is up to 22 hours , and charging is With USB-C cable about In 3 hours .

What's in the package?
The device is delivered With USB-C charging cable , with two replacement dust covers and with carrying bag .

Recycling instructions:

• Packaging: Sort corrugated cardboard, cardboard and plastic films according to local guidelines.

• Device: Electrical and electronic device – deliver For WEEE collection (WEEE) at the end of its useful life.

• Battery: Built-in Li-ion battery – deliver to a collection point for batteries/accumulators . Do not break, disassemble or expose to fire/high heat.

• Spare parts/seals: Rubber and foam parts are sorted according to local regulations; follow municipal waste disposal instructions.

EDMA – Innovation and ergonomics for professionals since 1937

French-based EDMA has established itself as a trusted partner for construction professionals for over 85 years. Founded in 1937, the company not only manufactures, but also designs high-quality hand tools that are designed to meet the challenges of demanding construction sites. EDMA's commitment to quality and practicality has made it an international player, and the company's tools are now used in over 60 countries around the world.

EDMA's core competence is solutions developed specifically for the needs of professionals in drywall, masonry, roofing, flooring and landscaping. The company's catalog of over 750 products is based on a clear product development strategy: the goal is to create innovative and practical tools that offer real added value to their users. EDMA's central promise is to develop products that save professionals time and, above all, reduce the physical strain caused by work. By investing heavily in ergonomics, EDMA implements its motto "durable tools for sustainable work", helping professionals work more efficiently and safely day after day.