Insulation wool cutter for precise cutting of insulation of various thicknesses.
Stone and mineral wool cutting table.
The device is attached to the wall with screws from the hanging points on the top edge. The cutter has a measuring scale for accurate sizing. The cutter is delivered in parts in a box. Suitable for wool 5-20cm thick.
Cutting insulation materials such as rock wool or insulation wool to exact dimensions can be tricky. We offer a solution, namely the Robota insulation wool cutting table is perfect for cutting insulation. With the cutting table, you can cut the wool either straight or at the desired angle precisely.
Use:
Place the cutting table upright, e.g. on a wall about a meter above the ground, so that it is comfortable to use. Then place the insulation material to be cut on the cutting table so that the point to be cut is in the groove in the middle of the two aluminum guides. Then take the knife intended for cutting insulation wool, push it between the guides. Press the guide firmly against the insulation wool with one hand, and with the other start cutting the wool with sawing movements while moving the knife downwards. This way the wool will be cut accurately and straight to the desired width. If you want to change the cutting angle, set the horizontal part on the left side to the desired angle first. Then place the wool at the desired point where it needs to be cut and cut it. Very convenient to use.


More information:

Product code R99-10006
Brands: Robota
EAN 6438212103686