Yato Round Brush M14 100 mm RST braided is a heavy-duty round brush for angle grinders. The braided (knotted) INOX wire bundles form a stiff and biting brush surface that effectively removes thick rust, multi-layered paints, oxides and welding slag. The round geometry is optimal for long straight strokes, brushing along edges and processing large flat surfaces.
The connection is M14, which is suitable for most common angle grinders in the 115–125 mm class. The Ø100 mm diameter offers a balance between coverage and control: work progresses quickly, but control is maintained even on profiles and edge zones. The stainless steel wire reduces the risk of iron contamination on stainless steel surfaces and is resistant to moisture.
The right speed and technique – gentle angle, light to moderate pressure and even sweeps – create a uniform, adhesion-enhancing microstructure without unnecessary removal of base material. Regular breaks and brush condition checks ensure a smooth finish and safe use.

Intended use:

Heavy duty rust and paint removal from flat surfaces: Ø100 mm coverage area speeds up cleaning of sheet steel, railings and structural steel. The braided wire bites into tight coatings and corrosion, leaving a rough surface for the primer to adhere to evenly.

Cleaning and slag removal of welding zones: The brush removes spatter and oxides from the heat zone before grinding, passivation or painting. The stiff braided wire withstands point loads and works in a controlled manner on seams, edges and near corners.

Surface roughening before coating/gluing: Mechanical roughening creates a uniform microstructure to improve adhesion of coatings and adhesives. Particularly suitable for stainless steel and black steel surfaces when aggressive pre-treatment is required.

Maintenance in outdoor and humid conditions: The corrosion resistance and low cross-contamination of INOX wire make the brush suitable for outdoor structures, tanks and steel parts of process equipment where surface cleanliness is critical.

Features:

Diameter: 100 mm – Good coverage and speed of progress on large surfaces.

Mounting: M14 thread – Compatible with most angle grinders; protective shield required.

Bristle material: Stainless steel wire (INOX), braided (knotted) – Very aggressive cutting for thick rust and slag.

Construction: Round brush – Even contact and stable control on long straight strokes.

Applications: Rust, paint, oxides, slag, spatter – Pre-cleaning and roughening before coating/painting.

RPM: Follow the maximum value marked on the product – To prevent overheating and damage.

Safety: Safety glasses/visor, respiratory protection, gloves, protective shield – To manage risks.

Yato Round brush M14 100 mm stainless steel braided – user manual:

Installation: Disconnect the angle grinder from the power supply. Attach the brush to the M14 thread and tighten according to the manufacturer's instructions. Check the protection plate.

Test run: Rotate the brush at idle speed; stop if any unusual vibration, noise or throw occurs.

How to work: Brush at a gentle angle, use light to moderate pressure and make even sweeping motions. Avoid prolonged, point-like contact.

Pause and check: Stop regularly, remove loose material and check for wear. Replace the brush if there are missing strands, uneven wear of the wire or damage to the hub.

Maintenance: Clean from dust and shavings; dry and store in a dry place. Do not straighten bent braids.

Warnings:

Always wear safety glasses/visors, a respirator suitable for the dust level, protective gloves and, if necessary, hearing protection.

Do not exceed the maximum speed allowed by the brush/machine.

Do not use a damaged or unbalanced brush.

Keep flammable materials away from sparking area.

Not for use in potentially explosive atmospheres. Keep out of reach of children.

Frequently Asked Questions, FAQ:
When should I choose a round brush over a cup brush? A round brush is better for long, straight strokes and large flat surfaces; a cup brush works well for more point contact and targeted areas.
Why braided wire? Braided wire is stiff and biting, which speeds up the removal of thick rust and slag. Corrugated wire leaves a more moderate roughness, but removes more slowly.
Can the brush be used on stainless steel? Yes. INOX wire reduces iron contamination. Clean the surface after use.
Is it suitable for aluminum? For light deoxidation and roughening, yes. Use light pressure and avoid heat build-up.

Recycling instructions:

Packaging: Cardboard/paper - recycling; plastic films - plastic collection.

Product: Metal hub and stainless steel wires - metal collection; other parts according to local guidelines.