Yato Construction Dehumidifier 50L / 24 H

The Yato 50 l/24h construction dehumidifier is designed to effectively remove excess moisture from enclosed spaces. This high-capacity dehumidifier is ideal for construction sites, poorly ventilated spaces, flood-damaged buildings and renovation projects. Its ability to remove up to 50 liters of moisture per day (30°C, RH 80%) significantly helps prevent the formation of mold and fungus, creating a healthier and drier working or living environment. The dehumidifier is effective in spaces up to 50-120 m² and has an air flow of 300 m³/h, ensuring fast and even drying.
Condensate can be removed in two different ways: either with a hose directly into the drain or using the removable 7-liter water tank. When the tank is full, the device automatically switches off, which prevents overflows and ensures safe use. The device also has a built-in timer, which allows the dryer to be programmed to operate in hourly intervals (1-24 hours), which allows energy-efficient and demand-based use. The LCD display indicates the real-time humidity level.
The Yato construction dehumidifier has several practical features, such as a pressure maintenance system and an automatic defrost function, which ensures efficient operation even at lower temperatures (5~35 °C). The washable mesh filter pre-filters dust and dirt from the air, extending the life of the device and maintaining its performance. The sturdy carrying handle makes it easy to move the device as needed.

Intended use:

Construction sites: Rapid drying of concrete, mortar and paint, which speeds up construction projects and improves the quality of work.
Poorly ventilated spaces: Basements, warehouses, garages and other spaces where moisture can accumulate and cause problems.
Flood-damaged buildings: Removing excess moisture quickly helps prevent mold damage and shortens drying time.
Renovation work: Drying old buildings before starting renovation or during different stages of renovation.
Water damage: Drying traces of sudden water damage quickly and effectively.
Large living spaces: Removing excess moisture from large apartments or houses, especially during humid seasons.

Features:

Maximum power: 750 W (27°C; Rh 60%) / 900 W (30°C; Rh 80%) - Efficient dehumidification.
Drying area: 50-120 m² - Suitable for large spaces.
Airflow: 300 m³/h - Fast and efficient drying.
Dehumidification capacity: 30 l/24h (27°C; Rh 60%) / 50 l/24h (30°C; Rh 80%) - High capacity.
Water tank capacity: 7 l - Large enough tank for longer use.
LCD Display: Yes - Real-time humidity level display.
Timer: Yes, 1-24 hours (1 hour increments) - Allows programming of operating time.
Automatic defrost: Yes - Efficient operation even at lower temperatures.
Pressure maintenance in the system: Yes - Ensures smooth operation.
Washable mesh filter: Yes - Easy to maintain and extends the life of the device.
Carrying handle: Yes - Easy to move.
Operating temperature range: 5~35 °C - Wide operating range.
Protection class: IP22 - Protected against vertical splashes of water.
Weight: 30 kg - Sturdy construction.
Refrigerant: R290 (200 g) - A more environmentally friendly option.

Yato Construction Dehumidifier 50L / 24 H user manual:

Placement: Place the dryer on a flat and stable surface in a room of at least 15 m². Leave enough space around the appliance for air circulation. Make sure the air ducts are not blocked.
Power connection: Connect the device to a grounded outlet (220-240 V, 50 Hz).
To start: Turn on the device using the power button. The LCD screen will show the current humidity level.
Humidity level setting: Set the desired humidity level using the adjustment buttons. Generally, the recommended humidity level is 40-60% RH.
Timer setting (if necessary): You can set the operating time using the timer buttons between 1 and 24 hours.
Draining: Check the water tank regularly to make sure it is full. When the tank is full, the appliance will automatically switch off. Empty the tank. You can also connect a hose to the appliance and drain the water directly into the drain.
Cleaning: Clean the washable mesh filter regularly by vacuuming or washing it with a mild soap solution and drying thoroughly before replacing.
Power off: Turn off the device using the power button and unplug the power cord from the outlet when not in use.
Storage: Store the dryer in a cool, dry place.

How to choose the right construction dryer:
Choosing the right construction dryer depends on several factors, such as the size of the space to be dried, the amount of moisture, the intended use and the temperature. Consider the following:

Dehumidification capacity: Usually stated in liters per day (l/24h) at specific temperature and humidity conditions (e.g. 30°C, 80% RH). Choose the dehumidification capacity based on the size of the room and the severity of the moisture problem. Larger and more humid rooms require a higher dehumidification capacity.
Drying area: Manufacturers indicate the recommended drying area in square meters. This gives a good indication of the suitability of the appliance for a given size space.
Airflow: The air flow (m³/h) of a dehumidifier affects how quickly air circulates through the device and moisture is removed. Higher airflow speeds up drying.
Water tank capacity: A larger tank will reduce the interval between emptyings, but can also make the device heavier. Consider whether a direct drain connection is possible.
Operating temperature range: Different dryers operate most efficiently at certain temperatures. Construction dryers should operate over a wide temperature range.
Additional features: Automatic defrost is an important feature if the dryer is used at lower temperatures. The timer allows for energy-efficient operation. The LCD display makes it easy to adjust settings and monitor humidity levels.
Size and weight: Consider the physical dimensions and weight of the device if you need to move it frequently.

Why choose Yato Construction Dehumidifier 50L / 24 H:
The Yato 50 l/24h construction dehumidifier is an excellent choice when you need efficient and reliable dehumidification in large spaces. Its high drying capacity (up to 50 l/day) and large drying area (50-120 m²) make it ideal for construction sites, renovation projects and other demanding conditions.
The device's user-friendly features, such as an LCD display, timer and automatic defrost, increase convenience and energy efficiency. The washable mesh filter is practical and keeps the device functional for a long time. The option to drain water either directly into the drain or into a 7-liter container brings flexibility in use.
In summary, the Yato construction dehumidifier is an effective, versatile and durable solution for removing excessive moisture in professional use and demanding conditions. Its large capacity and practical features make it a reliable tool for solving moisture problems.

Warnings:

The device must be installed, used and stored in a room with a floor area greater than 15 m².
Do not cover the device during use.
Make sure that the air intake and exhaust vents are not blocked.
Do not place the device near heat sources or flammable materials.
Use the device only in accordance with its operating instructions.
Do not tilt or knock the device over while it is in use or when it is filled with water.
Empty the water tank regularly.
Clean the filter regularly to maintain best performance.
If the power cord is damaged, it must be replaced by an authorized service center in order to avoid a hazard.
The device is intended for indoor use only.
Keep children and pets away from the device during use.
Do not attempt to repair the device yourself. Contact an authorized service center.

Frequently Asked Questions, FAQ:
Q: What is the drying capacity of the Yato construction dryer?
A: The drying capacity is up to 50 liters per day (30°C, 80% RH).
Q: How big of a space does the dryer fit in?
A: The dryer is suitable for rooms of 50-120 m².
Q: Does the device have a timer?
A: Yes, the device has a timer that can be set between 1-24 hours in hourly intervals.
Q: Does the device turn off automatically when the water tank is full?
A: Yes, the device will automatically turn off when the 7 liter water tank is full.
Q: Does the device require separate installation?
A: No, the device is portable and ready to use immediately after plugging in. Remember to place it in a space of at least 15 m².